Digiwave DLG-1189S LNBF for both 118, 119.
KU Band Universal Linear & Circular Dual output LNB with Dual polarization. Use only one LNB to receive signals from 119 and 118.8 Satellites
F/D
Ratio |
0.6
@ |
Input Freq. Range |
11.70~12.75GHz (10.60/10.75GHz: 22K) |
Gain
Flatness |
4dB over Band
|
Conversion Gain |
45dB @ 25
|
L.O.
Freq. |
10.60/9.75GHz
|
L.O. Stability |
}1.0MHz @ 25
}3.0MHz @ -40~60 |
Cross
polarization Discrimination |
60dB(min)
|
L.O. Phase Noise |
-50dBc/1KHz
-75dBc/10KHz
-95dBc/100KHz |
Noise
Figure |
0.5dB (Typ.)
|
Output Freq.
Range |
950~1950MHz
(9.75GHz)
950~2150MHz (10.60GHz) |
Band
Switching Voltage |
0/22KHz Tone
|
Output Connector |
75Ħ F-TYPE Female
|
| Operating Temperature |
-40~60 |
Polarization
selection |
V: 12V~14V DC H: 16~18V DC |
SETUP INSTRUCTIONS:
Using a 30-inch or larger dish, aim with the following settings:
For DGL-1189S you should setup as below will better:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
* LNB Power: ON
* LNB Type: Universal
* LNB Frequency: 9750Mhz/10750 MHz
Finally, do an AUTO SCAN or a BLIND SCAN
For DGL-1189D and DGL-1189Q you should setup as:
Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
* LNB Power: ON
* LNB Type: Universal
* LNB Frequency: 9750Mhz/10600 MHz
Finally, do an AUTO SCAN or a BLIND SCAN
DGL-1189S Specifications:
* Dual Output LNBF
* Input Frequency Range from 10.70Ghz ~ 12.75Ghz
* Output Frequency Range from 950Mhz ~ 2150Mhz
* L.O.: 9.75GHz and 10.60Ghz
* Low Phase Noise for Analog or Digital reception
* Excellent D.R.O. stability
* Noise Figure: 0.5dB (typ.)
* Best solution for and motorized satellite systems
now in your cart 
